Saniflo 040 Use and Care Manual download pdf (Page 4)

CAUTION

SANICONDENS

is a pump for lifting condensate water from

an air conditioning system, a condensation boiler or from

refrigeration units. Include a neutralisation device if necessary

(see the manufacturer’s instructions for your boiler).

The pump starts automatically and has a high level of

performance, safety and reliability provided that all the

installation and maintenance instructions described in this

notice are strictly followed.

Please take particular note of the information marked by :

» Indication that a risk of electrical origin exists,

« » Instructions for use only by qualified professionals.

OPERATING PRINCIPLE

SANICONDENS

contains a pump. The tank of the

SANICONDENS

is fitted with a float which controls the

operation of the motor. When the condensate enters the tank,

the pump starts up.

SPARE PARTS:

see fig.2

DIMENSIONS:

see fig.3

SANICONDENS

AREA OF APPLICATION AND

TECHNICAL DATA

Application

Air conditioning systems, boilers,

refrigeration units

Type CD10

Max. vertical pumping 15 Ft (4.5 m)

Maximum flow rate (gal / hour) 86 (326 l/h)

Min. pH 2.5

Voltage 110-115 V

Frequency 60 Hz

Power rating 60 W

Current consumption 1.5 A

Electrical class I

Protection index IP20

Sound level < 45 dBA

Maximum allowable temperature 160° F (70° C)

S3 15% (1min30 ON, 8min30 OFF)

Net weight 4.5 lbs

Tank volume 2 liters

Supply cable 6 Ft (2 m)

Discharge hose 20 Ft (6 m)

Alarm cable (3 core) 6 Ft (2 m)

Wall fastening Yes

CAUTION:

All applications other than those described in this notice are

prohibited.

PERFORMANCE CURVES:

see fig.5

VERTICAL PUMPING/HORIZONTAL PUMPING:

see fig.6

INSTALLATION

SANICONDENS

may be mounted on a wall by using the

mounting tabs on the tank..

The unit should be easy to access for testing and

maintenance.

The unit must be installed leveled. Adjust the

installation using a level before mounting the unit.

Make sure that the equipment is protected from damp while

installing it.

CONNECTING TO THE DISCHARGE PIPE

The SANICONDENS

discharge pipe must be connected to

the flexible hose

(supplied : length 20 Ft). This hose should

be used to form the vertical section of the discharge pipe.

• Place the flexible hose onto the non-return valve of the

SANICONDENS

(see diagram

)

• Position the flexible hose in the most vertical position

possible to avoid it kinking.

• It is advisable to make a smooth bend to avoid the hose

from kinking.

• The discharge vinyl tubing (included) can be connected to

a PVC line large in diameter by using the plastic reducer

that is provided with the system.

As shown on the fig.

, the plastic fitting connects to the

end of the 3/8” vinyl tubing at the top and it increases the

diameter to ease the connection to a PVC line. (Reducer

is 3/8” barbed x 3/4" male end)

The SANICONDENS

is fitted with a non-return valve to

prevent re-activation.

ELECTRICAL CONNECTION

1. The electrical installation should be carried out by a qualified

person. The unit should be connected to a fully grounded

electrical supply. The SANICONDENS

requires a 120V

single phase AC 60 Hz supply.

CONNECTION AT THE COVER INLET

The unit has 2 inlets 1" in diameter (1 on each side - see fig.

). To connect the water to be drained off, connect the

water inlet to one of the inlets. If necessary, use the adapter

(3/4”, 1-1/4”, 1-1/2” in diameter).

ALARM

SANICONDENS

is fitted with a detection system

that can trigger an alarm if the water level rises too high

(audible or visual alarm, 1.5V to 120V), see diagram

. Brown wire: shared wire

. Black wire: normally off

. Blue wire: normally on

To fit the alarm, connect the blue and brown wires

of the alarm to the respective terminals on the

SANICONDENS

US CDN

INSTRUCTIONS INTENDED SOLELY FOR

QUALIFIED PROFESSIONALS

9420 249 SANICONDENS.indd 49420 249 SANICONDENS.indd 4 05/04/11 11:0305/04/11 11:03

1 2 3 4 5 6 7 8

Comments to this Manuals

No comments

Saniflo 040 Use and Care Manual Page 4

Comments to this Manuals

Related products and manuals for Unknown Saniflo 040